OPS-Ingersoll Eagle 5-Axis Machining Centers | Authorized Dealer in Minnesota

By Steve Brown, Founder, Iron Machine Tool  |  15+ Years in Precision CNC Distribution

Ingersoll 5 Axis eagle machine

OPS-Ingersoll is a Precision Machine Tool Builder - Precision Milling Machine - precision CNC machines

Iron Machine Tool is the authorized OPS-Ingersoll distributor for manufacturers across Minnesota, Wisconsin, Iowa, and Illinois. The Eagle series is OPS-Ingersoll's precision 5-axis vertical machining center lineup, built in Germany and engineered for manufacturers who require tight tolerances on graphite electrodes, hardened tool steels, and complex mold and die components.

Four Eagle configurations are available through Iron Machine Tool: the V550 and V9G for graphite electrode machining, and the V5C and V9C for coolant-based applications. Spindle speeds across the line range from 20,000 to 42,000 RPM. HSK tooling interfaces and ATC capacities from 30 to 211 positions accommodate a wide range of production environments.

OPS-Ingersoll is a German precision machine tool builder with more than five decades of focus on high-speed, high-accuracy machining. Their Eagle line is designed for manufacturing environments where electrode accuracy and surface finish consistency are non-negotiable production requirements.

Contact Steve Brown to discuss which Eagle configuration fits your application.

OPS-Ingersoll Eagle 5-Axis Models

OPS-Ingersoll V550 5-axis graphite machining center with 42,000 RPM spindle distributed by Iron Machine Tool Minnesota.

V550 (5-Axis Graphite)

  • 42,000 RPM Spindle
  • Machine Travels (X x Y x Z)
    21.65” x 15.7” x 15.7”
  • Table Work Area (X x Y)
    15.7” Diameter

V550

A 5-Axis High-Speed and High-Precision Machining Center for producing Graphite Electrodes or Milling hardened tool steels

  • Machine Travels (X x Y x Z)
    21.65” x 15.7” x 15.7”
  • Table Work Area (X x Y)
    15.7” Diameter
  • 42,000 RPM Spindle
  • HSK-E40 Tool Holder
  • 32 Position ATC

Read More 

OPS-Ingersoll Eagle V9G 5-axis CNC machining center for large mold and graphite electrode production with 36,000 RPM spindle.

Eagle V9G (5-Axis Graphite)

  • 36,000 RPM Spindle
  • Machine Travels (X x Y x Z)
    31.5” x 23.6” x 19.7”
  • Table Work Area (X x Y)
    23.6” Diameter

V9G

5-Axis Machining for Milling Larger Die/Mold Components or Larger Sized Electrodes

  • Machine Travels (X x Y x Z)
    31.5” x 23.6” x 19.7”
  • Table Work Area (X x Y)
    23.6” Diameter
  • 36,000 RPM Spindle
  • HSK-E50 Tool Holder
  • 72 Position ATC

Read More 

OPS-Ingersoll Eagle V5C 5-axis coolant CNC machining center with up to 42,000 RPM spindle.

Eagle V5C (5-Axis Coolant)

  • 36,000 or 42,000 RPM Spindle
  • Machine Travels (X x Y x Z)
    21.6” x 15.7” x 15.7”
  • Table Work Area (X x Y)
    15.7” Diameter

V5

A Fast & Flexible 5-Axis Machining Solution Built to Deliver the highest degree of precision

  • Machine Travels (X x Y x Z)
    21.6” x 15.7” x 15.7”
  • Table Work Area (X x Y)
    15.7” Diameter
  • 36,000 or 42,000 RPM Spindle
  • 30 or 60 Position ATC

Read More 

OPS-Ingersoll Eagle V9C ultra-precision 5-axis coolant machining center for larger complex part production.

Eagle V9C (5-Axis Coolant)

    • 20,000, 24,000, or 36,000 RPM Spindle
    • Machine Travels (X x Y x Z)
      31.4” x 23.6” x 15.7”
  • Table Work Area (X x Y)
    37.4” x 23.6”

V9

A Flexible Ultra-Precision 5-Axis Machining Center for Larger Parts

  • Machine Travels (X x Y x Z)
    31.4” x 23.6” x 15.7”
  • Table Work Area (X x Y)
    37.4” x 23.6”
  • 20,000, 24,000, or 36,000 RPM Spindle
  • 48, 72, 150, or 211 Position ATC

Read More 

What Sets the Eagle Line Apart

OPS-Ingersoll designed the Eagle series for manufacturers who cannot accept variability in electrode accuracy or cavity surface finish. Four machine attributes drive that consistency.

  • High-speed spindles. The Eagle line spans 20,000 RPM on the V9C to 42,000 RPM on the V550 and V5C. Higher spindle speeds allow finer chip loads on graphite and hardened steel, producing smoother surface finishes without increasing cycle time.
  • HSK tooling interface. The V550 and V5C use HSK-E40; the V9G uses HSK-E50. HSK is a self-locking, face-and-taper contact system that maintains rigidity at high spindle speeds. That rigidity translates directly to dimensional accuracy on fine electrode features and complex mold cavities.
  • Simultaneous 5-axis motion. All four Eagle models offer simultaneous 5-axis contouring. The tool follows compound surfaces, steep walls, and undercuts without repositioning the workpiece. For electrode producers, this means multi-face electrode geometry in one setup. For mold shops, it eliminates repositioning error on deep ribs and curved parting lines.
  • Automation-ready design. Robotic pallet loading and integrated automation cells are available across the Eagle line. If your shop runs lights-out or near-unmanned production, Eagle machining centers are built to support that workflow.

All four configurations are available through Iron Machine Tool for manufacturers in Minnesota, Wisconsin, Iowa, and Illinois.

Why Work with Iron Machine Tool for Eagle 5-Axis

Iron Machine Tool is the authorized OPS-Ingersoll distributor for Minnesota, Wisconsin, Iowa, and Illinois.

  • Pre-sales application support.

Steve Brown has more than 15 years of experience placing and supporting precision CNC equipment with Midwest manufacturers. He reviews your application before recommending a configuration, so you are not buying a machine that does not fit your workflow.

  • Integrated solutions.

Iron Machine Tool distributes both OPS-Ingersoll Eagle 5-axis machining centers and Mitsubishi sinker EDM machines. If your shop needs both graphite electrode machining capability and EDM capacity, we can support the full workflow from electrode production to finished cavity.

  • Pre-purchase demonstrations.

Qualified manufacturers can arrange a demonstration or application review before committing to a purchase. Contact Steve Brown to schedule one.

  • Regional presence.

Iron Machine Tool serves manufacturers across Minnesota, Wisconsin, Iowa, and Illinois. Local distributor support means faster response on pre-sales inquiries, application questions, and post-sale service coordination.

Frequently Asked Questions :

 Ready to Evaluate an Eagle 5-Axis Machining Center?

 Iron Machine Tool serves manufacturers across Minnesota, Wisconsin, Iowa, and Illinois. Contact Steve Brown for an application review or demonstration.

Scroll to top